Batch Script - PING
Advertisements
This batch command sends ICMP/IP "echo" packets over the network to the designated address.
Syntax
PING [address]
Where address is the IP address or hostname of the destination system.
Example
@echo off Ping 127.0.0.1
Output
The above command will send ICMP/IP "echo" packets to the destination address 192.168.0.1. Following is an example of the output.
Pinging 127.0.0.1 with 32 bytes of data: Reply from 127.0.0.1: bytes = 32 time<1ms TTL = 128 Reply from 127.0.0.1: bytes = 32 time<1ms TTL = 128 Reply from 127.0.0.1: bytes = 32 time<1ms TTL = 128 Reply from 127.0.0.1: bytes = 32 time<1ms TTL = 128 Ping statistics for 127.0.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms
batch_script_commands.htm
Advertisements